5477 results

Filter search

Apply filters

Halls

Country/Region

5477 results

  • "PULLPO" ball bearing puller set, K-70-C

    • InnoTrans 2018
    • Hall 20 112
    To remove grooved ball bearings without causing damage and without having to dismantle the shaft. Description With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed. Puller is self-tensioning and easy to handle. Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the ja…
    Save
  • 'Series EMA' Battery powered torque wrench

    Product of ws-tools OHG
    • InnoTrans 2018
    • Hall 8.1 107
    slim design low weight for fatique reduced operation 4 gears for fasten tightening and maximum torques up to 60 torque steps selectable ratchet adjustment of gears, easily adjustable in 24 steps of 15 degrees: secure fastening of screw connections even in confined spaces brushless (FINE) PowerDrive motor with high degree of efficiency and wear-free characteristics Dust-proof thanks to encapsulation battery with charge level display lithium-ion battery with charge level indicator available from 7…
    Save
  • (heated) floating floor system

    • InnoTrans 2018
    • Hall 3.1 310
    Ready to install, no further gluing lightweight reduced LCC heating system on the top or the lower side  
    Save
  • (V)DZ Engine

    • InnoTrans 2018
    • Hall 18 302
    Up to 4000kWm Medium speed, 720-1000rpm Anti-Clock or Clock rotation Four stroke Cylinders are built in V Direct fuel injection Turbocharged Charge air is water-cooled Can run on heavy fuel, vegetable oil, animal greases, etc. Available in 12 and 16 cylinders in V Our medium speed V-engine based on the DZ family is offering a perfect balance between performance and required investment. This makes the engine most suitable for t…
    Save
  • - Fabrics for soffits, headrests and other components for public transport

    Product of RUNOTEX
    • InnoTrans 2018
    • Hall 1.1 302
    Save
  • - Flat fabrics for public transport and car market (NEW!)

    Product of RUNOTEX
    • InnoTrans 2018
    • Hall 1.1 302
    Save
  • - Pile fabrics for public transport

    Product of RUNOTEX
    • InnoTrans 2018
    • Hall 1.1 302
    Save
  • 05/06 damper

    Product of Koni B.V.
    • InnoTrans 2018
    • Hall 9 406
    05/06 Innovation: KONI developed a new range of damper series with excellent performance characteristics. Our new 05 – 06 series dampers are utilizing a two-directional oil flow principle through the piston. The smart damper design features several improvements compared to traditional dampers. Due to the increased working area in the cylinder tube the dampers have an enhanced damper stiffness making them perfectly suitable for yaw damper applications. A significant weight reduction has b…
    Save
  • 1-AYKY-OT

    New
    • InnoTrans 2018
    • Hall 22 214
    The solution consists basically in the use of a polymer tube as a structural element enabling the user to blow in and install or blow out a fibre optic cable. The tube forms integral part of the metallic hybrid cable. The metallic power cable for the transmission of electric power, designed for a rated voltage up to 0.6/1 kV, or the communication cable carrying an electric signal and the polymer tube are installed under a common outer sheath of the hybrid cable. The polymer tube that is used for…
    Save
  • 1-zeiliges konkaves Markieren von Eisenbahnrädern

    • InnoTrans 2018
    • Hall 8.2 304
    Die Aufgabenstellung 1-zeiliges konkaves Markieren von Eisenbahnrädern für den ICE bei einer Temperatur von 1.100° C Die Lösung Integration eines robotergeführten hitzebeständigen Nadelprägers, in die vollautomatische Produktionslinie der Räderwalzanlage des italienischen Eisenbahnräderherstellers Lucchini.
    Save
  • 1000 SERIES

    Product of OLAB SRL
    • InnoTrans 2018
    • Hall 10.2 209
    brass fittings
    Save
  • 115RE, 136RE rail joint bar to AREMA 2012 For North America

    • InnoTrans 2018
    • Hall 22 506
    AREMA Standard Fishplate Standard: AREMA 2012 Material: Chinese steel grade 55# Size: 115RE, 119RE, 132RE, 136RE, 141RE, 100RE, 100RB Chemical Composition C Mn S P 0.35-0.60 ≤1.2 ≤0.040 ≤0.050 Mechanical Property Tensile strength Rm: ≥690 Mpa Yield strength Rel / Rr0.2: ≥480 Mpa Elongation A : ≥12% Reduction of Area Z: ≥25%
    Save
  • 160-Ton Rail Puller

    Product of Holland L.P.
    • InnoTrans 2018
    • Hall 26 205
    Holland's 160-Ton Rail Puller has made the impossible, possible! It's high capacity, extended working stroke, compact design, and custom control features have allowed railroads to install rail welds in applications that were not possible before. With the elimination of the need for a separate puller carrier and power source, closure welding has become more cost effective, more productive, and much easier. Features and Benefits of the 160-Ton Rail Puller: 160 Tons (145 metric tons) Pullin…
    Save
  • 17 type Forged yoke、17 type Draw gear、MT-2 type Buffer、Follower、Coupler yoke key

    • InnoTrans 2018
    • Hall 20 210
    Draft gear for railway trucks.
    Save
  • 19

    Product of Intermas-Elcom GmbH
    • InnoTrans 2018
    • Hall 15.1 204
    For cooling of modules in cabinets or housings. Technical data Materials front panel: 3 mm aluminum, anodized housing, grill: 1 mm steel, al-zinc Ambient temperature max. 70 °C Max. static pressure 73 - 88 Pa Noise level per fan 56,5 - 60,2 dB (A) Power consumption 45 / 42 W
    Save
  • 1D-, 2D- and 3D measurement solutions

    Product of SICK AG
    • InnoTrans 2018
    • Hall 9 707
    FROM MICRON TO MILE. IN ALL DIMENSIONS. From the most minimal to the farthest distances – distance sensors and LiDAR sensors from SICK – the arket and technology leader in these segments – cover the world in all dimensions. For both indoor and outdoor applications involving different measuring ranges, SICK offers individual solutions based on ultrasound, light or radar for a wide variety of scanning ranges. The integration technology s highly flexible: whether analog or serial, via fieldbus, IO-…
    Save
  • 1kV, 2 kV and 3 kV DC Feeder Cubicle for fixed Railway installations

    Product of TranzCom NV/s.a.
    • InnoTrans 2018
    • Hall 25 316
    Description: Circuit breaker on floor-truck Voltages up to 3,3 kV DC Separated and isolated compartments for busbars, cable, breaker and LV Busbar-currents up to 7500A Truck positions; service and testing Plug in contacts isolation by guillotine type shutters Mechanical interlocks between truck & circuit-breaker and between truck & door Isolation UL94V0 Specifications: Unom: 3kV DC Inom: up to 4300A Busbars: up to 8000A Breaking capacity: up to 93 kA Dimensions: according to the unit…
    Save
  • 2 Post Lifts

    • InnoTrans 2018
    • Hall B, CityCube 609
    Electromechanical asymmetric lifts with chain drive.
    Save
  • 2. Fireproof/Bulletproof/Power generation Glass

    • InnoTrans 2018
    • Hall 5.1 107
    a. Isolate flames, heat and smoke, with good sound isolation performance and mechanical strength as well as physical/chemical stability. Meet China A type and Europe EI30-EI90, EW30-EW60 fireproof classification requirement.  b.Composite material composed of glass and prime engineering plastic through special processing, normally transparent, there is poly-carbonate fiber layer between common glass layers.  c. Adopts paraboloid reflection mirror to converge heat for power generation, mainly …
    Save
  • 2.5” SATA SSD 3MG2-P

    • InnoTrans 2018
    • Hall 4.1 225
    Innodisk 2.5” SATA SSD 3MG2-P is SATA III 6Gb/s flash based disk, which delivers excellent performance, especially in random data transfer rate, and which offers reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3MG2-P 2.5” SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability. Additionally, 3MG2…
    Save
  • 2.5” SATA SSD 3SR-P

    • InnoTrans 2018
    • Hall 4.1 225
    Innodisk 2.5” SATA SSD 3SR-P is a SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability. Especially, it comes with several data security functions, including QEraser/ SEraser/ Destroy and also Write Protect. All the security functions can be triggered both by hardware and software approaches. 2.5” SATA SSD 3SR-P is compliant with MIL-STD-810F/G standards. The SSD is equipped ruggedized hardware design and thus it can perform well in the harsh environment. 2.5” SAT…
    Save
  • 214RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 22.90 and 88.90 COACHES

    • InnoTrans 2018
    • Hall 23 526
    Length over the buffers: 26.400 mm; Gauge: 1.435 mm; Height from top to rail level: 4.050 mm; Speed: 200 km/h; Bogie type: Minden Deutz; Brake type: KE-GPR-Mg(D) ep, NBÜ; Empty weight: 42,9 t for both types of coaches; Multi-voltage static converter SSVC 43 type: Input voltage: 1000 V/16 2/3 Hz; 1500 V/50 Hz; 1500 Vdc; 3000 Vdc; Output voltage: 24 Vdc, 230 V/50 Hz, 3x400 V/50 Hz; Doors actuation installation: electro-pneumatic with centralized control through RIC key; Sanitary installati…
    Save
  • 24V und 110V LED Tube

    Product of ONTOPx GmbH
    • InnoTrans 2018
    • Hall 10.1 203
    Unsere 24V More Milky LED Tubes wurden 2010 gemeinsam mit dem Kunden der Deutschen Bahn für den Einsatz in Regionalbahnwaggons zum Einsatz bei der Arbeit in den Instandhaltungswerken entwickelt. Die Röhren sind seit 2012 erfolgreich bei weiteren Verkehrsbetrieben im Einsatz. Die Tubes bieten eine umweltfreundliche und kostensparende Alternative zu herkömmlichen Leuchtstoffröhren. Die nach den neuesten Normen (VDE EMV, VDE Safety) zertifizierte Tube-Generation ist für den Temperaturbereich -20° …
    Save
  • 25/15 kV Voltage and Current Transformers for on board and substation installation

    • InnoTrans 2018
    • Hall 11.1 308
    Save
  • 3 X 130 KVA Auxiliary Converter

    • InnoTrans 2018
    • Hall 15.1 216
    The product is developed for feeding auxiliary power to WAP7/ WAG9, WAG9H three phase locomotives for Indian Railways. It is in accordance with IEC 61287-1, IEC 60571, IEC 60310 and IEC 61373. Salient Features: A modular concept, in which, each module serves a specific power and control function. Designed to give 3x130 kVA with VVVF control. Designed to sustain wide input voltage and frequency variations. Interface with Key multiplier set. Digital Signal Processor (DSP) ba…
    Save
  • 3. Water based Paint

    • InnoTrans 2018
    • Hall 5.1 107
    Water soluble environmental friendly industry paint Applicable to surface on the railway locomotive, ship, automobile and rustproof steel frames.   A. Water as dispersion medium, no burning, no blasting and no pollution. B. No poison, no smell, no fire danger, safe and environment-friendly, healthy for human. C. Application safe and convenient, high efficiency. D. Technically mature, fine paint film, meet all kinds painting requirement, similar cost with alkyd paint. E. Excellent adherence and r…
    Save
  • 3-axle Bogie

    Product of Greenbrier Europe
    • InnoTrans 2018
    • Hall 3.2 304
    • Outdoor Display 2/117
    • Outdoor Display 2/118
    • Outdoor Display 4/405
    • Outdoor Display 4/406
    The 3-axle bogie type 3ALs1o-K(V) is designed to equip heavy freight wagons with a maximum weight of 25t/axle. The bogie is constructed in accordance with UIC and EN requirements. The bogie weight is ~7.6 tons and consists of 3 wheelsets with a diameter of 920 mm, a welded bogie frame, suspension with progresive leaf springs, fixed side bearings and a clasp brake using composite blocks 2xBg. If required the bogie can be equipped with a weighing valve. Advantages: - Reduced weight - Radial stee…
    Save
  • 3-DIM PC-Basic

    • InnoTrans 2018
    • Hall B, CityCube 503
    This program offers solutions for 3D measurements, evaluations and documentation all in one product. 3-DIM PC-Basic runs on standard laptops and is designed for 3D measurements in ralway industry (railcoaches, underframes, motor vehicles, bogies...). Various dimensions apply and are of importance when geometrically scanning or controlling objects with different dimensions. The software consists of four components: Graphic (visual presentation and point editing) Test table (list of coordinate…
    Save
  • 3/1,5 kV Current and Voltage Transducers for on board installation

    • InnoTrans 2018
    • Hall 11.1 308
    Save
  • 3324RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 3370RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 350° Scanner OPTIMESS CMS

    Product of ELAG Elektronik AG
    New
    • InnoTrans 2018
    • Hall 23 410
    The 350° Scanner OPTIMESS CMS measures by means of a laser, based on time-of-flight measurement the clearance gauge of Tunnels and other tramway or train track layouts. Like all OPTIMESS sensors, the phase-based 350° Scanner is precise, reliable, rugged and waterproof. Visit us at Innotrans Hall 23 Stand 410!
    Save
  • 350km/h High-speed trains

    • InnoTrans 2018
    • Hall 2.2 310
    • Outdoor Display 4/109
    • Outdoor Display 2/109
    We have built the 350Km/h high speed train technology platform and established the high speed train product system that boasts complete models and state-of-the-art technologies. We have researched and developed the 350Km/h high speed train that boasts world-class performances in operation speed, comprehensive comfort, reliability, safety, energy-saving, environmental protection and intelligence. Safety: the train excels in operation safety indicators such as critical speed, derailment coeff…
    Save
  • 37” PID DUAL DISPLAY

    Product of Disign Incorporated
    • InnoTrans 2018
    • Hall 2.1 110
    DISIGN offers a variety of displays for Railway Solution to satisfy the requirements of the modern rail station such as Active Route-map displays, Next train indicators, Passenger information, Platform displays, Concourse displays, Station-Clocks etc. This DISIGN’s product is designed with the followingsHigh performance & Long-Life LED backlight Wide viewing angle performance with Toughen AR glass for protection Anti-Vibration & Shock structure Easy to replace any part to save the cost of main…
    Save
  • 38" Fanelss Railway Panel PC

    New
    • InnoTrans 2018
    • Hall 4.1 220
    The Advantech ARS-P3800 is a fanless Passenger Information System, EN 50155 certified, serving as a reliable platform to provide passenger information on wide versatility of vehicles, such as trains and trams. It features a 38 inch stretched LCD panel, is powered by AMD Embedded G-Series System-on-Chip GX-217GA processor , and designed from the ground up to be robustness with IP (Ingress protection) level 54. It supports EN 50155 T1 level, for smoothly implementation in a wide working temperatur…
    Save
  • 3D Laser Radar (3DLR)

    Product of IHI Corporation
    • InnoTrans 2018
    • Hall 5.2 528
    IHI's 3D Laser Radar (3DLR)'s main application is as a level crossing obstacle detection system. To-date, over 2,000 units of the 3DLR have been supplied worldwide. Installing the 3DLR system at level crossings in order to detect in real time objects such as vehicles stranded in the path of an oncoming train significantly reduces the risk of train-obstacle collision accidents within the level crossing. IHI’s 3DLR’s system architecture consists of a head unit, controller unit and self-evaluation …
    Save
  • 3D measurement of rail vehicles

    • InnoTrans 2018
    • Hall B, CityCube 503
    From historic steam locomotives to modern high-tech trains, Sokkia instruments + 3-DIM PC-Basic ensures proper dimensioning. Today's rail systems have been in operation for decades: On the one hand, steam locomotives are still in operation as tourist attractions, but on the other hand, new and modern high-speed trains meet expectations for rapid transport. All of these rail systems, however, share a requirement: They must be safe and this means they must be precisely dimensioned and be within th…
    Save
  • 3D Metrology

    • InnoTrans 2018
    • Hall 8.1 217
    GMA Werkstoffprüfung GmbH uses state-of-the-art laser tracker systems for a wide range of demanding geometric measurements in industry. These are systems from Leica and API (Leica AT960-XR with T-Probe and T-Scan 5, API OmniTrac 2 with vProbe). These systems combine highest measurement accuracy with ultra-mobility. Measurement volumes of up to 100 m diameter can be measured from a single point of view with accuracies in the 0.1 mm range. In addition, the systems are equipped with optional probes…
    Save
  • 3D Obstacles detection

    Product of SelectraVision
    • InnoTrans 2018
    • Hall 5.2 312
    3D OBSTACLES DETECTION The system is composed by a 3D laser head that can be installed on a pole. It detects 3D obstacles in Level crossings and gives an alarm in case of obstacle inside the level crossing area. The software provides a 3D reconstruction of the level crossing area and indicated as alarmed the obstacles that do not belong to the level crossing. By software it is possible to choose the obstacles size and volume and the area to detect. The system can detect people and veh…
    Save
  • 3D scanners & automated inspection

    • InnoTrans 2018
    • Hall 8.2 307
    Creaform offers a wide range of scanning solutions also featuring TRUaccuracy technology and dynamic referencing. This gives Creaform scanner users the benefit of portable measurement equipment they can simply bring to the part they need to measure. The white light scanner Go!SCAN 3D and the 3D scanners Handyscan 3D and MetraSCAN 3D are ideal for performing 3D inspection, quality control, reverse engineering, CAD comparison, 3D modelling and conformity assessment tasks.  For automated inspe…
    Save
  • 3D Track Safety Simulator

    Product of Transurb Simulation
    • InnoTrans 2018
    • Hall 6.2 109
    TRAIN TRACK WORKERS FOR SAFETY PROCEDURES WITH OUR 3D SIMULATORThe Track Safety Simulator aims to train track maintenance staff for safety procedures, assess their response time in stressful situations and certify their skills. It was formerly designed as a tailor-made solution for Infrabel, the Belgian railway infrastructure manager, and received the RailTech Innovation Award (Public Transport Category) in Utrecht, the Netherlands. The solution designed for Infrabel consists of a platform surro…
    Save
  • 3D TUBE Forming

    • InnoTrans 2018
    • Hall 5.1 312
    BEKEL, in Eskisehir, is able to form and machine tubes and pipes from 8mm up to 220mm. BEKEL is supplying to automotive and railway industry with the experience over 15 years of tube and pipe forming.  Most common applications of our products are air brake tubes for wagons, cooling tubes for HVAC systems, engine tubes, handrails. BEKEL is certified by Bureau Veritas based on IRIS in 2015. 
    Save
  • 3D visualisation services

    Product of SIMCON s.r.o.
    • InnoTrans 2018
    • Hall 6.1 205
    We offer the visualisation of your facility operation in dynamic interactive 3D virtual environment (built in Villon), including the animation of transport processes, detailed modelling of infrastructure, vehicles, terrain as well as buildings and trees. Simcon first builds dynamic interactive simulation model of the operation of your facility that includes requested transportation or storage processes. This simulation model is then visualised using Villon's 3D engine and enhanced with addition…
    Save
  • 3D Wheel Measurement System

    New
    • InnoTrans 2018
    • Hall 6.2 115
    The system is designed for contactless, automatic real-time measurement of rail vehicles (locomotives, railcars, underground trains, trams) and uses a combination of five laser scanners that are mounted in the track area and calibrated to a common system. The measuring cycle starts when an inductive sensor detects a wheel (RFID code). As the wheel passes through the laser scanner system, the diameter, profile and distance between the wheels are measured and corresponding tolerances are given. T…
    Save
  • 3rd iaf Congress on Rail Infrastructure Works 22nd and 23rd May 2019 in Münster

    • InnoTrans 2018
    • Hall 23 201
    3rd iaf Congress on Rail Infrastructure Works 22nd and 23rd May 2019 in Münster Experts and representatives of leading international railway companies will come together for the third time in this form and discuss the further development of railway infrastructures within Europe. The high-ranking participants of the panel will present the ideas, concepts and new approaches to adapt to the requirements and raise the capacity of existing and future networks. The International Exhibition for Track…
    Save
  • 3rd Rail

    • InnoTrans 2018
    • Hall 26 226
    In the third rail sector, Powerlines offers international customers a patented conductor rail system. In addition to the 3rd rail which is available in three different cross sections, the product range also includes supports (steel or GRP), expansion joints, ramps, insulators, covers, cable junctions. The Powerlines 3rd rail consists of two aluminum profiles with a steel clip.
    Save
  • 3rd Rail Insulator

    • InnoTrans 2018
    • Hall 7.1a 211
    Save