5476 results

Filter search

Apply filters

Types

Halls

Country/Region

5476 results

  • Escogear FTRN

    Product of ESCO Couplings N.V.
    • InnoTrans 2018
    • Hall 20 208
    The ESCOGEAR FTRN Rail traction coupling accepts at the same time, high speeds up to 6000+ RPM as well as the highest misalignments conditions, i.e. angles up to 7° combined with an extremely large axial freedom. The reliability right from the beginning of this coupling concept created a positive interest of bogie designers looking to increase life time of the drive as well as to reduce the LCC. Extremely low cost of ownership of the coupling helped to reduce that of the bogie, the extremely lo…
    Save
  • Speed sensors

    Product of NORIS Group GmbH
    • InnoTrans 2018
    • Hall 6.2 315
    NORIS provides a wide product range of speed sensors for magnetic as well as non-magnetic scanning systems. These sensors register the rotation of toothed wheels made from ferromagnetic metals such as iron and steel but also aluminium. Our sensors are available with various measurement principles, including difference-hall-effect principle, inductive-magnetic principle as well as eddy current principle. Moreover, the sensors are available in different versions of the output signal. Multi-channe…
    Save
  • RQM - conduit clamp system

    Product of FLEXA GMBH & CO. KG
    • InnoTrans 2018
    • Hall 15.1 218
    The solid construction of the stackable system holder RQM is especially suitable for the higher mechanical requirements in rail construction. By simply plugging the upper and lower part you can of a pre-assemble the system. The almost closed surface (internal screws) is simple to clean. An extensive range of accessories with reducers, cable clamp inserts and movable conduit holders for the jumpers between the cars, makes this complete system to an allrounder in the field of fastening systems. …
    Save
  • RQK-GW-PA (repair sleeve)

    Product of FLEXA GMBH & CO. KG
    New
    • InnoTrans 2018
    • Hall 15.1 218
    There is often the situation, that cables and wires have to be installed retrofit. To avoid a completely new installation, FLEXA offers the RQK-GW-PA (repair sleeve) to solve this problem. The product based on polyamide material consists of two half shells with integrated TPE-sealing, which can be fixed retrofit with self-locking screws. The RQK-GW used mostly in the exterior area requires after the installation the IP 68/69k again.
    Save
  • Beweglicher Schlauchhaltereinsatz

    Product of FLEXA GMBH & CO. KG
    New
    • InnoTrans 2018
    • Hall 15.1 218
    Mit dem neuen beweglichen Schlauchhalter RQMR-MOVE haben wir unsere Produktreihe der massiven Schlauchhaltersysteme erweitert. In Verbindung mit dem stapelbaren Systemhalter RQM ist dieses System speziell für Einsatzgebiete geeignet, an denen hohe mechanische Querkräfte auf den Schlauch wirken, wie z.B. Gelenke, Roboter oder Wagenübergänge im Schienenfahrzeugbau. Der RQMR-MOVE komplettiert das Zubehörprogramm mit Reduzierungen, Kabelklemmeinsätzen und macht dieses Komplettsystem zu einem Allroun…
    Save
  • Online shop

    • InnoTrans 2018
    • Hall 11.1 224
    The online shop is integrated in the Exhibitor Area. Here you can comfortably and easily order any additional services you would like for your online and/or print entries. After successfully completing the ordering process you will receive an order confirmation to your account email address. All booked services are available instantly and can be edited in your online and catalogue entries. If you are interested to book one of our new combined packages or singles services, please log …
    Save
  • HEICO-TEC® Tensioning Systems

    • InnoTrans 2018
    • Hall 8.2 102
    HEICO-TEC® Tensioning Systems - Easy, fast and reliable assembly of large bolted joints High preload force due to torsion-free assembly Controlled friction characteristics ensure the highest tightening and repeat accuracy Losses from settlement of the joint do not occur and full capacity of the joint is achieved Tension nuts and reaction nuts are compatible with common strength classes according to ISO 898-2 Can be re-used several times Standard available from M20-M120 strength class 8 and …
    Save
  • HEICO-LOCK® Wedge Locking Systems

    • InnoTrans 2018
    • Hall 8.2 102
    Even under extremes of vibration or dynamic loads, the HEICO-LOCK® Wedge Locking System provides maximum reliability. When the bolt is tightened, the external radial teeth of the HEICO-LOCK® Wedge Lock System embed themselves in an interlocking fashion with the respective mating surface. If the securing system is subject to dynamic stress, movement is only possible between the internal washer surfaces. This results in an increase in the clamping force. HEICO-LOCK® Product Range HEICO-LOCK® Wed…
    Save
  • HEICO-LOCK® wedge lock washers

    • InnoTrans 2018
    • Hall 8.2 102
    Even under extremes of vibration or dynamic loads, the HEICO-LOCK® Wedge Locking System provides maximum reliability. When the bolt is tightened, the external radial teeth of the HEICO-LOCK® Wedge Lock System embed themselves in an interlocking fashion with the respective mating surface. If the securing system is subject to dynamic stress, movement is only possible between the internal washer surfaces. This results in an increase in the clamping force. Certified system for securing bolts, worki…
    Save
  • C-Mast System: overhead line mast system for high-speed train lines

    • InnoTrans 2018
    • Hall 25 222
    C-Mast System: overhead line mast system for high-speed train lines Especially developed for high-speed train lines, the C-Mast System by Europoles is the only system of catenary masts certified by Deutsche Bahn for power supply to trains at speeds up to 330 km/h. This modular mast system, produced in spun concrete, combines many advantages while offering favorable installation and operational costs. These benefits have made it the mast system of choice for national and international mainline r…
    Save
  • Catenary systems for urban transit

    • InnoTrans 2018
    • Hall 25 222
    It’s not only in densely populated urban environments that mass rapid transit is playing an increasingly important role. Track-based solutions are currently experiencing nothing less than a renaissance: with new technologies enhancing the performance of the infrastructure and improving cost effectiveness. For catenary systems for urban transit, Europoles offers optimal mast solutions, oriented to the individual requirements of the customer. In these applications, Europoles supports its customers…
    Save
  • Style services and mock-up

    • InnoTrans 2018
    • Hall 2.2 403
    Working Method Hand and digital sketching Rendering and virtual reality CAS 3D Modeling Feasibility A, B, C Class Milling and manual modeling Scale and 1:1 Mock-up of parts of the train to the entire car
    Save