5479 results

Filter search

Apply filters

Types

Halls

Country

5479 results

  • "PULLPO" ball bearing puller set, K-70-C

    • InnoTrans 2018
    • Hall 20 112
    To remove grooved ball bearings without causing damage and without having to dismantle the shaft. Description With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed. Puller is self-tensioning and easy to handle. Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force. Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the ja…
    Save
  • 'Series EMA' Battery powered torque wrench

    Product of ws-tools OHG
    • InnoTrans 2018
    • Hall 8.1 107
    slim design low weight for fatique reduced operation 4 gears for fasten tightening and maximum torques up to 60 torque steps selectable ratchet adjustment of gears, easily adjustable in 24 steps of 15 degrees: secure fastening of screw connections even in confined spaces brushless (FINE) PowerDrive motor with high degree of efficiency and wear-free characteristics Dust-proof thanks to encapsulation battery with charge level display lithium-ion battery with charge level indicator available from 7…
    Save
  • (heated) floating floor system

    • InnoTrans 2018
    • Hall 3.1 310
    Ready to install, no further gluing lightweight reduced LCC heating system on the top or the lower side  
    Save
  • (V)DZ Engine

    • InnoTrans 2018
    • Hall 18 302
    Up to 4000kWm Medium speed, 720-1000rpm Anti-Clock or Clock rotation Four stroke Cylinders are built in V Direct fuel injection Turbocharged Charge air is water-cooled Can run on heavy fuel, vegetable oil, animal greases, etc. Available in 12 and 16 cylinders in V Our medium speed V-engine based on the DZ family is offering a perfect balance between performance and required investment. This makes the engine most suitable for t…
    Save
  • - Fabrics for soffits, headrests and other components for public transport

    Product of RUNOTEX
    • InnoTrans 2018
    • Hall 1.1 302
    Save
  • - Flat fabrics for public transport and car market (NEW!)

    Product of RUNOTEX
    • InnoTrans 2018
    • Hall 1.1 302
    Save
  • - Pile fabrics for public transport

    Product of RUNOTEX
    • InnoTrans 2018
    • Hall 1.1 302
    Save
  • 05/06 damper

    Product of Koni B.V.
    • InnoTrans 2018
    • Hall 9 406
    05/06 Innovation: KONI developed a new range of damper series with excellent performance characteristics. Our new 05 – 06 series dampers are utilizing a two-directional oil flow principle through the piston. The smart damper design features several improvements compared to traditional dampers. Due to the increased working area in the cylinder tube the dampers have an enhanced damper stiffness making them perfectly suitable for yaw damper applications. A significant weight reduction has b…
    Save
  • 1-AYKY-OT

    New
    • InnoTrans 2018
    • Hall 22 214
    The solution consists basically in the use of a polymer tube as a structural element enabling the user to blow in and install or blow out a fibre optic cable. The tube forms integral part of the metallic hybrid cable. The metallic power cable for the transmission of electric power, designed for a rated voltage up to 0.6/1 kV, or the communication cable carrying an electric signal and the polymer tube are installed under a common outer sheath of the hybrid cable. The polymer tube that is used for…
    Save
  • 1-zeiliges konkaves Markieren von Eisenbahnrädern

    • InnoTrans 2018
    • Hall 8.2 304
    Die Aufgabenstellung 1-zeiliges konkaves Markieren von Eisenbahnrädern für den ICE bei einer Temperatur von 1.100° C Die Lösung Integration eines robotergeführten hitzebeständigen Nadelprägers, in die vollautomatische Produktionslinie der Räderwalzanlage des italienischen Eisenbahnräderherstellers Lucchini.
    Save
  • 1000 SERIES

    Product of OLAB SRL
    • InnoTrans 2018
    • Hall 10.2 209
    brass fittings
    Save
  • 115RE, 136RE rail joint bar to AREMA 2012 For North America

    • InnoTrans 2018
    • Hall 22 506
    AREMA Standard Fishplate Standard: AREMA 2012 Material: Chinese steel grade 55# Size: 115RE, 119RE, 132RE, 136RE, 141RE, 100RE, 100RB Chemical Composition C Mn S P 0.35-0.60 ≤1.2 ≤0.040 ≤0.050 Mechanical Property Tensile strength Rm: ≥690 Mpa Yield strength Rel / Rr0.2: ≥480 Mpa Elongation A : ≥12% Reduction of Area Z: ≥25%
    Save
  • 160-Ton Rail Puller

    Product of Holland L.P.
    • InnoTrans 2018
    • Hall 26 205
    Holland's 160-Ton Rail Puller has made the impossible, possible! It's high capacity, extended working stroke, compact design, and custom control features have allowed railroads to install rail welds in applications that were not possible before. With the elimination of the need for a separate puller carrier and power source, closure welding has become more cost effective, more productive, and much easier. Features and Benefits of the 160-Ton Rail Puller: 160 Tons (145 metric tons) Pullin…
    Save
  • 17 type Forged yoke、17 type Draw gear、MT-2 type Buffer、Follower、Coupler yoke key

    • InnoTrans 2018
    • Hall 20 210
    Draft gear for railway trucks.
    Save
  • 19

    Product of Intermas-Elcom GmbH
    • InnoTrans 2018
    • Hall 15.1 204
    For cooling of modules in cabinets or housings. Technical data Materials front panel: 3 mm aluminum, anodized housing, grill: 1 mm steel, al-zinc Ambient temperature max. 70 °C Max. static pressure 73 - 88 Pa Noise level per fan 56,5 - 60,2 dB (A) Power consumption 45 / 42 W
    Save
  • 1D-, 2D- and 3D measurement solutions

    Product of SICK AG
    • InnoTrans 2018
    • Hall 9 707
    FROM MICRON TO MILE. IN ALL DIMENSIONS. From the most minimal to the farthest distances – distance sensors and LiDAR sensors from SICK – the arket and technology leader in these segments – cover the world in all dimensions. For both indoor and outdoor applications involving different measuring ranges, SICK offers individual solutions based on ultrasound, light or radar for a wide variety of scanning ranges. The integration technology s highly flexible: whether analog or serial, via fieldbus, IO-…
    Save
  • 1kV, 2 kV and 3 kV DC Feeder Cubicle for fixed Railway installations

    Product of TranzCom NV/s.a.
    • InnoTrans 2018
    • Hall 25 316
    Description: Circuit breaker on floor-truck Voltages up to 3,3 kV DC Separated and isolated compartments for busbars, cable, breaker and LV Busbar-currents up to 7500A Truck positions; service and testing Plug in contacts isolation by guillotine type shutters Mechanical interlocks between truck & circuit-breaker and between truck & door Isolation UL94V0 Specifications: Unom: 3kV DC Inom: up to 4300A Busbars: up to 8000A Breaking capacity: up to 93 kA Dimensions: according to the unit…
    Save
  • 2 Post Lifts

    • InnoTrans 2018
    • Hall B, CityCube 609
    Electromechanical asymmetric lifts with chain drive.
    Save
  • 2. Fireproof/Bulletproof/Power generation Glass

    • InnoTrans 2018
    • Hall 5.1 107
    a. Isolate flames, heat and smoke, with good sound isolation performance and mechanical strength as well as physical/chemical stability. Meet China A type and Europe EI30-EI90, EW30-EW60 fireproof classification requirement.  b.Composite material composed of glass and prime engineering plastic through special processing, normally transparent, there is poly-carbonate fiber layer between common glass layers.  c. Adopts paraboloid reflection mirror to converge heat for power generation, mainly …
    Save
  • 2.5” SATA SSD 3MG2-P

    • InnoTrans 2018
    • Hall 4.1 225
    Innodisk 2.5” SATA SSD 3MG2-P is SATA III 6Gb/s flash based disk, which delivers excellent performance, especially in random data transfer rate, and which offers reliability making it the ideal solution for a variety of applications, including embedded system, industrial computing, and enterprise field. 3MG2-P 2.5” SSD not only performs unmatched performance, but also designed with Innodisk owned technical knowhow to ensure the data integrity and highest levels of reliability. Additionally, 3MG2…
    Save
  • 2.5” SATA SSD 3SR-P

    • InnoTrans 2018
    • Hall 4.1 225
    Innodisk 2.5” SATA SSD 3SR-P is a SATA III 6Gb/s Flash based disk, which delivers excellent performance and reliability. Especially, it comes with several data security functions, including QEraser/ SEraser/ Destroy and also Write Protect. All the security functions can be triggered both by hardware and software approaches. 2.5” SATA SSD 3SR-P is compliant with MIL-STD-810F/G standards. The SSD is equipped ruggedized hardware design and thus it can perform well in the harsh environment. 2.5” SAT…
    Save
  • 214RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 22.90 and 88.90 COACHES

    • InnoTrans 2018
    • Hall 23 526
    Length over the buffers: 26.400 mm; Gauge: 1.435 mm; Height from top to rail level: 4.050 mm; Speed: 200 km/h; Bogie type: Minden Deutz; Brake type: KE-GPR-Mg(D) ep, NBÜ; Empty weight: 42,9 t for both types of coaches; Multi-voltage static converter SSVC 43 type: Input voltage: 1000 V/16 2/3 Hz; 1500 V/50 Hz; 1500 Vdc; 3000 Vdc; Output voltage: 24 Vdc, 230 V/50 Hz, 3x400 V/50 Hz; Doors actuation installation: electro-pneumatic with centralized control through RIC key; Sanitary installati…
    Save
  • 24V und 110V LED Tube

    Product of ONTOPx GmbH
    • InnoTrans 2018
    • Hall 10.1 203
    Unsere 24V More Milky LED Tubes wurden 2010 gemeinsam mit dem Kunden der Deutschen Bahn für den Einsatz in Regionalbahnwaggons zum Einsatz bei der Arbeit in den Instandhaltungswerken entwickelt. Die Röhren sind seit 2012 erfolgreich bei weiteren Verkehrsbetrieben im Einsatz. Die Tubes bieten eine umweltfreundliche und kostensparende Alternative zu herkömmlichen Leuchtstoffröhren. Die nach den neuesten Normen (VDE EMV, VDE Safety) zertifizierte Tube-Generation ist für den Temperaturbereich -20° …
    Save
  • 25/15 kV Voltage and Current Transformers for on board and substation installation

    • InnoTrans 2018
    • Hall 11.1 308
    Save
  • 3 X 130 KVA Auxiliary Converter

    • InnoTrans 2018
    • Hall 15.1 216
    The product is developed for feeding auxiliary power to WAP7/ WAG9, WAG9H three phase locomotives for Indian Railways. It is in accordance with IEC 61287-1, IEC 60571, IEC 60310 and IEC 61373. Salient Features: A modular concept, in which, each module serves a specific power and control function. Designed to give 3x130 kVA with VVVF control. Designed to sustain wide input voltage and frequency variations. Interface with Key multiplier set. Digital Signal Processor (DSP) ba…
    Save
  • 3. Water based Paint

    • InnoTrans 2018
    • Hall 5.1 107
    Water soluble environmental friendly industry paint Applicable to surface on the railway locomotive, ship, automobile and rustproof steel frames.   A. Water as dispersion medium, no burning, no blasting and no pollution. B. No poison, no smell, no fire danger, safe and environment-friendly, healthy for human. C. Application safe and convenient, high efficiency. D. Technically mature, fine paint film, meet all kinds painting requirement, similar cost with alkyd paint. E. Excellent adherence and r…
    Save
  • 3-axle Bogie

    Product of Greenbrier Europe
    • InnoTrans 2018
    • Hall 3.2 304
    • Outdoor Display 2/117
    • Outdoor Display 2/118
    • Outdoor Display 4/405
    • Outdoor Display 4/406
    The 3-axle bogie type 3ALs1o-K(V) is designed to equip heavy freight wagons with a maximum weight of 25t/axle. The bogie is constructed in accordance with UIC and EN requirements. The bogie weight is ~7.6 tons and consists of 3 wheelsets with a diameter of 920 mm, a welded bogie frame, suspension with progresive leaf springs, fixed side bearings and a clasp brake using composite blocks 2xBg. If required the bogie can be equipped with a weighing valve. Advantages: - Reduced weight - Radial stee…
    Save
  • 3-DIM PC-Basic

    • InnoTrans 2018
    • Hall B, CityCube 503
    This program offers solutions for 3D measurements, evaluations and documentation all in one product. 3-DIM PC-Basic runs on standard laptops and is designed for 3D measurements in ralway industry (railcoaches, underframes, motor vehicles, bogies...). Various dimensions apply and are of importance when geometrically scanning or controlling objects with different dimensions. The software consists of four components: Graphic (visual presentation and point editing) Test table (list of coordinate…
    Save
  • 3/1,5 kV Current and Voltage Transducers for on board installation

    • InnoTrans 2018
    • Hall 11.1 308
    Save
  • 3324RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 3370RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 350° Scanner OPTIMESS CMS

    Product of ELAG Elektronik AG
    New
    • InnoTrans 2018
    • Hall 23 410
    The 350° Scanner OPTIMESS CMS measures by means of a laser, based on time-of-flight measurement the clearance gauge of Tunnels and other tramway or train track layouts. Like all OPTIMESS sensors, the phase-based 350° Scanner is precise, reliable, rugged and waterproof. Visit us at Innotrans Hall 23 Stand 410!
    Save
  • 350km/h High-speed trains

    • InnoTrans 2018
    • Hall 2.2 310
    • Outdoor Display 4/109
    • Outdoor Display 2/109
    We have built the 350Km/h high speed train technology platform and established the high speed train product system that boasts complete models and state-of-the-art technologies. We have researched and developed the 350Km/h high speed train that boasts world-class performances in operation speed, comprehensive comfort, reliability, safety, energy-saving, environmental protection and intelligence. Safety: the train excels in operation safety indicators such as critical speed, derailment coeff…
    Save
  • 37” PID DUAL DISPLAY

    Product of Disign Incorporated
    • InnoTrans 2018
    • Hall 2.1 110
    DISIGN offers a variety of displays for Railway Solution to satisfy the requirements of the modern rail station such as Active Route-map displays, Next train indicators, Passenger information, Platform displays, Concourse displays, Station-Clocks etc. This DISIGN’s product is designed with the followingsHigh performance & Long-Life LED backlight Wide viewing angle performance with Toughen AR glass for protection Anti-Vibration & Shock structure Easy to replace any part to save the cost of main…
    Save
  • 38" Fanelss Railway Panel PC

    New
    • InnoTrans 2018
    • Hall 4.1 220
    The Advantech ARS-P3800 is a fanless Passenger Information System, EN 50155 certified, serving as a reliable platform to provide passenger information on wide versatility of vehicles, such as trains and trams. It features a 38 inch stretched LCD panel, is powered by AMD Embedded G-Series System-on-Chip GX-217GA processor , and designed from the ground up to be robustness with IP (Ingress protection) level 54. It supports EN 50155 T1 level, for smoothly implementation in a wide working temperatur…
    Save
  • 3D Laser Radar (3DLR)

    Product of IHI Corporation
    • InnoTrans 2018
    • Hall 5.2 528
    IHI's 3D Laser Radar (3DLR)'s main application is as a level crossing obstacle detection system. To-date, over 2,000 units of the 3DLR have been supplied worldwide. Installing the 3DLR system at level crossings in order to detect in real time objects such as vehicles stranded in the path of an oncoming train significantly reduces the risk of train-obstacle collision accidents within the level crossing. IHI’s 3DLR’s system architecture consists of a head unit, controller unit and self-evaluation …
    Save
  • 3D measurement of rail vehicles

    • InnoTrans 2018
    • Hall B, CityCube 503
    From historic steam locomotives to modern high-tech trains, Sokkia instruments + 3-DIM PC-Basic ensures proper dimensioning. Today's rail systems have been in operation for decades: On the one hand, steam locomotives are still in operation as tourist attractions, but on the other hand, new and modern high-speed trains meet expectations for rapid transport. All of these rail systems, however, share a requirement: They must be safe and this means they must be precisely dimensioned and be within th…
    Save
  • 3D Metrology

    • InnoTrans 2018
    • Hall 8.1 217
    GMA Werkstoffprüfung GmbH uses state-of-the-art laser tracker systems for a wide range of demanding geometric measurements in industry. These are systems from Leica and API (Leica AT960-XR with T-Probe and T-Scan 5, API OmniTrac 2 with vProbe). These systems combine highest measurement accuracy with ultra-mobility. Measurement volumes of up to 100 m diameter can be measured from a single point of view with accuracies in the 0.1 mm range. In addition, the systems are equipped with optional probes…
    Save
  • 3D Obstacles detection

    Product of SelectraVision
    • InnoTrans 2018
    • Hall 5.2 312
    3D OBSTACLES DETECTION The system is composed by a 3D laser head that can be installed on a pole. It detects 3D obstacles in Level crossings and gives an alarm in case of obstacle inside the level crossing area. The software provides a 3D reconstruction of the level crossing area and indicated as alarmed the obstacles that do not belong to the level crossing. By software it is possible to choose the obstacles size and volume and the area to detect. The system can detect people and veh…
    Save
  • 3D scanners & automated inspection

    • InnoTrans 2018
    • Hall 8.2 307
    Creaform offers a wide range of scanning solutions also featuring TRUaccuracy technology and dynamic referencing. This gives Creaform scanner users the benefit of portable measurement equipment they can simply bring to the part they need to measure. The white light scanner Go!SCAN 3D and the 3D scanners Handyscan 3D and MetraSCAN 3D are ideal for performing 3D inspection, quality control, reverse engineering, CAD comparison, 3D modelling and conformity assessment tasks.  For automated inspe…
    Save
  • 3D Track Safety Simulator

    Product of Transurb Simulation
    • InnoTrans 2018
    • Hall 6.2 109
    TRAIN TRACK WORKERS FOR SAFETY PROCEDURES WITH OUR 3D SIMULATORThe Track Safety Simulator aims to train track maintenance staff for safety procedures, assess their response time in stressful situations and certify their skills. It was formerly designed as a tailor-made solution for Infrabel, the Belgian railway infrastructure manager, and received the RailTech Innovation Award (Public Transport Category) in Utrecht, the Netherlands. The solution designed for Infrabel consists of a platform surro…
    Save
  • 3D TUBE Forming

    • InnoTrans 2018
    • Hall 5.1 312
    BEKEL, in Eskisehir, is able to form and machine tubes and pipes from 8mm up to 220mm. BEKEL is supplying to automotive and railway industry with the experience over 15 years of tube and pipe forming.  Most common applications of our products are air brake tubes for wagons, cooling tubes for HVAC systems, engine tubes, handrails. BEKEL is certified by Bureau Veritas based on IRIS in 2015. 
    Save
  • 3D visualisation services

    Product of SIMCON s.r.o.
    • InnoTrans 2018
    • Hall 6.1 205
    We offer the visualisation of your facility operation in dynamic interactive 3D virtual environment (built in Villon), including the animation of transport processes, detailed modelling of infrastructure, vehicles, terrain as well as buildings and trees. Simcon first builds dynamic interactive simulation model of the operation of your facility that includes requested transportation or storage processes. This simulation model is then visualised using Villon's 3D engine and enhanced with addition…
    Save
  • 3D Wheel Measurement System

    New
    • InnoTrans 2018
    • Hall 6.2 115
    The system is designed for contactless, automatic real-time measurement of rail vehicles (locomotives, railcars, underground trains, trams) and uses a combination of five laser scanners that are mounted in the track area and calibrated to a common system. The measuring cycle starts when an inductive sensor detects a wheel (RFID code). As the wheel passes through the laser scanner system, the diameter, profile and distance between the wheels are measured and corresponding tolerances are given. T…
    Save
  • 3rd iaf Congress on Rail Infrastructure Works 22nd and 23rd May 2019 in Münster

    • InnoTrans 2018
    • Hall 23 201
    3rd iaf Congress on Rail Infrastructure Works 22nd and 23rd May 2019 in Münster Experts and representatives of leading international railway companies will come together for the third time in this form and discuss the further development of railway infrastructures within Europe. The high-ranking participants of the panel will present the ideas, concepts and new approaches to adapt to the requirements and raise the capacity of existing and future networks. The International Exhibition for Track…
    Save
  • 3rd Rail

    • InnoTrans 2018
    • Hall 26 226
    In the third rail sector, Powerlines offers international customers a patented conductor rail system. In addition to the 3rd rail which is available in three different cross sections, the product range also includes supports (steel or GRP), expansion joints, ramps, insulators, covers, cable junctions. The Powerlines 3rd rail consists of two aluminum profiles with a steel clip.
    Save
  • 3rd Rail Insulator

    • InnoTrans 2018
    • Hall 7.1a 211
    Save
  • 3rd rail shoes

    Product of Mersen
    New
    • InnoTrans 2018
    • Hall 11.1 201
    Ask about our EcoDesign 3rd rail shoes (Dismantle and Recycle System, 100% Clip-together construction): Replacement of the carbon part only Eradicates the need for lead brazing No more corrosion of the carrier and bolts Eco friendly solution!
    Save
  • 3S Koblenz, Germany

    • InnoTrans 2018
    • Hall 4.2 209
    The Koblenz gondola system was originally designed as a temporary transport solution for visitors to the Federal Horticultural Show (BUGA) in 2011. But, built a year in advance, the system began operation in the summer of 2010, offering a birds eye view for visitors travelling from the BUGA grounds, across the Rhine to the Ehrenbreitstein fortress. 3S (tricable detachable gondolas) technologies utilize three cables; two for support (track ropes) and one for propulsion (haul rope). They appeal …
    Save
  • 400 UHC® HSH® Heavy Haul

    • InnoTrans 2018
    • Hall 21 101
    The high-strength 400 UHC® HSH® rail grade has been very successfully used for years in tracks with extreme loads all over the world (especially in heavy haul transport with axle loads over 30 tons) and has become the standard grade both for curves and for straight track. Long-term worldwide operational experiences of heavy haul railways as well as joint track tests with customers and also in test centres confirm the excellent characteristics of this rail grade. The operational performance of …
    Save
  • 400 UHC® HSH® Metro-Systems

    • InnoTrans 2018
    • Hall 21 101
    Due to the short time frames for maintenance and renewal works, applying the rail grade 400 UHC® HSH® for metro-systems and commuterlines has been indtified as highly beneficial. Field tests and regular operation in several European countries impressively confirm its advantage.
    Save
  • 400 UHC® HSH® Mixed Traffic

    • InnoTrans 2018
    • Hall 21 101
    Unlike ordinary heat treated rail steel grades, 400 UHC® HSH® features an increased carbon content, which also accounts for the brand name UHC® (“Ultra-High-Carbon“). The micro-structure remains 100% perlitic and is produced on the basis of an ecologically aware low-alloy concept which also enables proper weldability. The result is a resistance to wear, corrugation and rolling contact fatigue (RCF) unmatched up to now in European mixed traffic applications. Due to the reduced corrugation also a …
    Save
  • 470-SJ Feed Unit

    Product of Sponge-Jet, Inc.
    • InnoTrans 2018
    • Hall 8.2 109
    This Feed Unit is feature-rich and larger the than our most popular Feed Unit with up to two and a half hours of uninterrupted blast time before refilling. Features specific to the 470-SJ are: Utility step High-capacity muffler Blast pressure adjustment Lifting eyes Fork pockets High-performance casters Secondary moisture separator High-volume pressure relief valve Centralized controls for precision monitoring and adjustment …
    Save
  • 48” Native BER LCD

    Product of Disign Incorporated
    • InnoTrans 2018
    • Hall 2.1 110
    DISIGN offers a variety of displays for Railway Solution to satisfy the requirements of the modern rail station such as Active Route-map displays, Next train indicators, Passenger information, Platform displays, Concourse displays, Station-Clocks etc. This DISIGN’s product is designed with the followings Native BER LCD High performance & Long-Life LED backlight Wide viewing angle performance with Toughen AR glass for protection Anti-Vibration & Shock structure High-Contrast and Better looki…
    Save
  • 4MA

    Product of Ster
    • InnoTrans 2018
    • Hall 1.1 211
    Seat designed for city and suburban commutor vehicles ergonomic shape carbon or stainless steel frame fast and easy upholstery assembly / disassembly anti-vandal and FR options availible used in trams and buses
    Save
  • 4RailCargo

    Product of Ab Ovo
    • InnoTrans 2018
    • Hall 6.1 229
    4 Rail Cargo is our SaaS product for rail freight transport and maps all processes of EVU´s in an integrated system, starting with contract deposit, pricing with customers up to wagon and train formation and the execution of all planning processes for resources. The entire order-to-cash process and the creation of the required documents are also mapped.
    Save
  • 500 KVA HOG Converter

    • InnoTrans 2018
    • Hall 15.1 216
    The product is designed to meet requirement of IEC 60571 (Edition 2.1), IEC 61287-1 (Edition 2.0), IEC 60310 (Edition 3.0). IEC 61373 (Edition 2.0) and other relevant IEC and Indian (BIS) standards. Salient Features: State of the art DSP based system System. Stabilised and balanced output at 750 V and 50 Hz with minimum distortion. Balanced output eliminates the need of special auxiliary motors thereby reducing the cost of auxiliary motors. Near unity power factor achieved us…
    Save
  • 55" PID DUAL LCD DISPLAY

    Product of Disign Incorporated
    • InnoTrans 2018
    • Hall 2.1 110
    DISIGN offers a variety of displays for Railway Solution to satisfy the requirements of the modern rail station such as Active Route-map displays, Next train indicators, Passenger information, Platform displays, Concourse displays, Station-Clocks etc. This DISIGN’s product is designed with the followings High performance & Long-Life LED backlight Wide viewing angle performance with Toughen AR glass for protection Anti-Vibration & Shock structure Easy to replace any part to save the cost and…
    Save
  • 6.7.1

    • InnoTrans 2018
    • Hall 22 204
    Save
  • 6-axle 80-foot articulated wagon for the transport of containers

    • InnoTrans 2018
    • Hall 3.2 208
    • Outdoor Display 2/115
    The intermodal wagon was designed and produced by United Wagon Company according to European standards specifically for operation on 1,435 mm track gauge in Europe. Thanks to its articulated structure, the 80-foot wagon has a payload capacity of up to 107.5 tons, which allows it to safely transport various ISO container sizes, tank-containers and swap bodies with a total weight of up to 36 tons. The wagon is equipped with hinged container pins in compliance with European standards for the accomm…
    Save
  • 60E1 (R260, R350HT, 370CRHT )

    Product of EVRAZ
    • InnoTrans 2018
    • Hall 26 304
    60E1 (R260, R350HT, 370CRHT). Standard and Heat treated grades for high speed, conventional and heavy haul application. Maximum length 100 meters Standard EN 13674-1:2011 and customers specification. Other profiles available : 54E1, 60E2, 50E6, 49E1, 60E1A1 Rail depth - 172 mm Weight of 1 m - 60.21 kg
    Save
  • 6DMH160 with automatic water filling system

    • InnoTrans 2018
    • Hall 15.1 305
    Nickel cadmium battery model for High speed train
    Save
  • 70/30 FH - Range INNOVO

    Product of Herbert KNEITZ GmbH
    • InnoTrans 2018
    • Hall 1.1 418
    Our premium series for EN 45 545. An intelligent material concept from the bus industry has been adapted to the standards in the rail sector. The passenger takes a seat on a functional fabric which stores heat and transports moisture. For the operator, this mixture means double the life of the seat upholstery fabric, best cleaning properties and the highest light and color fastness. Even after years of intensive use, these fabrics look like new and well maintained. Many large fleets worldwide re…
    Save
  • 8-axle low-floor carriages

    • InnoTrans 2018
    • Hall 3.2 203a
    Save
  • 80t Coal Hopper Wagon

    • InnoTrans 2018
    • Hall B, CityCube 602
    The wagon is for China standard gauge railway, mainly used for shipping bulk freight like coal and ore. It could be use by power station, harbor, coal dressing and steel company for fixed groups, periodic duty and fixed point discharging. The wagon is suitable for site operation where the ground is equipped with ground hopper or high trestle work which coal could be unloaded from both sides simultaneously. It could be unloaded either by compressed-air drive or manually.
    Save
  • 85/15 - Range LANOVA und VISIO

    Product of Herbert KNEITZ GmbH
    • InnoTrans 2018
    • Hall 1.1 418
    Due to the high proportion of natural fibers, these two article series meet the highest demands on seating comfort. Especially in long-distance traffic, the passengers appreciate the comfortable seating climate. This material comp. is in use worldwide and meets most of the international safety standards. Material composition in pile 85% Wool, 15% Polyamide EN 45-545: HL 3 NF F 16-101: M2 F2 DIN 5510: S4 SR2 ST2 UNI CEI 11170: applicable BS 6853: Cat. 1 A PN-K: approved GOST: approved ASTM…
    Save
  • 8800SX SmartMaps

    • InnoTrans 2018
    • Hall 23 402
    RTI's 8800SX SmartMaps is a visual-map based infrastructure database, designed to quickly identify and locate problem areas across your network.
    Save
  • 8800SX SurfaceMap

    • InnoTrans 2018
    • Hall 23 402
    RTI’s high speed 8800SX SurfaceMap system captures a digital magnetic signature of your rail every 1mm of travel. Detection capabilities include rolling contact fatigue/head checking, squats, welds, joints and track pumping.
    Save
  • 8800SX Ultrasonics

    • InnoTrans 2018
    • Hall 23 402
    RTI's 8800SX ultrasonics is a high resolution automated rail flaw detection system. Built upon the highly successful 8000SX, the 8800SX delivers a greater level of detectability and repeatability.
    Save
  • 900G BI-BLOCK SERIES

    Product of OLAB SRL
    • InnoTrans 2018
    • Hall 10.2 209
    brass and AVP steel double-locking swivel fittings 
    Save
  • КП 010-3 semi-automatic welder

    Product of KZESO PJSC
    • InnoTrans 2018
    • Hall 5.2 316
    PJSC "KZESO" continues to develop the line of semi-automatic welders of КП 010 type which gained good reputation in the sphere of machine-building industry. New specialized КП 010-3 semi-automatic welder has been produced with the increased diameter range (from 0,8 up to 2,0 mm) of the consumable electrode (welding wire). Structurally the control board, wire feeding device, power and gas connectors are placed inside of the body of vertical execution to protect them from damages. For easier acc…
    Save
  • µSTICK® and µSTICK® TFM

    Product of Dipostel sarl
    New
    • InnoTrans 2018
    • Hall 22 607
    The solid stick, a solid lubricant embedded in a polymer matrix, is applied in small quantities directly to the wheel. μSTICK® ensures lowest coefficient of friction between the flange of the wheel and the gauge face and reduces wear dramatically. μSTICK® TFM ensures a traction coefficient, which increases with increasing wheel slip (“positive friction”) between the tread of the wheel and top of rail. This guarantees optimal traction without noise and corrugation wear.
    Save
  • A Bogie / Wheel-set exchange

    Product of Mechan Limited
    • InnoTrans 2018
    • Hall 2.2 206
    Mechan offers an extensive range of bogie and wheelset drop systems to suit all applications. Its bogie drops facilitate the removal and replacement of complete bogies and undergear equipment from coupled rail vehicles. When they are not in use, the road they are situated on is safe for normal depot traffic, as the rail beams latch into place and fully interlock. A pit under the bogie gives full clearance and side platforms offer all-round access to the item being changed. Mechan provides bogi…
    Save
  • A coil and leaf springs testing stand

    • InnoTrans 2018
    • Hall 23 608
    The correct state of resilient elements is a prerequisite the proper functioning of rail vehicles. For this reason the coil and leaf springs must be regularly tested to determine their properties and characteristics. Offered by MTL Asco Rail testing devices provide testing to the full extent required for coil and leaf springs. The stand is designed to testing the following types of springs:coil springs and a set of those springs, volute springs, leaf springs and parabolic leaf springs, metal-rub…
    Save
  • A completely fantastic Crew!

    • InnoTrans 2018
    • Hall 1.1 324
    We offer a trained crew, orientated in sales, that respects hygiene and security. We offer fantastic incentive complete with involved and fun training. That at the end of the day boosts onboard sales by 25%, because they love what they do and have the motivation to do so!  
    Save
  • A Mechan Railcar Lifting Jack

    Product of Mechan Limited
    • InnoTrans 2018
    • Hall 2.2 206
    Our flagship jacks are raising standards in the transport industry. Thanks to our patented Megalink controller, they enable the synchronised lifting of multiple rail cars by a single operator. Mechan’s jacks can be divided into three main types. All have the same high standards of construction and function, but boast different features: Mobile jacks (fixed anvil) should be used on a flat workshop floor. They have a built-in jacking and steering mechanism and fixed anvil. The complete ja…
    Save
  • A rapid dismounting solution for a UIC semi-permanent drawbar

    New
    • InnoTrans 2018
    • Hall 3.2 301
    With the aim of always looking for any enhancement, following a request from one of our customers to assist them with a solution for mounting and dismounting a UIC semi-permanent drawbar which could be carried out by a single person on track, LAF designed a solution with a secure collar in accordance with the customer technical specification. This solution enables the operator to improve both productivity and efficiency.
    Save
  • A Series™

    • InnoTrans 2018
    • Hall 12 307
    Our A Series™ product lines, which include AT, ATP, ATM and AHD Series™, have key placement in all areas of Heavy Duty Equipment, Agriculture, Marine, Automotive, Military, Alternative Energy and other demanding interconnect applications. Based on our superior build quality, high-performance capabilities and having been developed to be compatible with all other existing standard products industry-wide, our A Series™ products are perfect alternatives for you. With regard to the different pro…
    Save
  • A Workshop Equipment

    Product of Mechan Limited
    New
    • InnoTrans 2018
    • Hall 2.2 206
    Mechan’s extensive range of rail depot maintenance products include:Railcar lifting jacks Underfloor lifting systems Bogie drops and wheelset drops Railcar traversers and turntables Bogie test machines and bogie press equipment Bogie handling – platforms, manipulators, turntables and storage Engine removal and handling equipment Under-car equipment removal and handling equipment
    Save
  • A.S.T. CBM305 (Car Body Measurement) – Software for the Geometrical Measurement of Rolling Stock

    • InnoTrans 2018
    • Hall 20 217
    The necessity of measuring rolling stock using modern industrial measuring systems is justified by increasing demands on product quality. Quality control both in production as well as in repair must be very exact and extremely economical. Irrespective of whether the vehicle measurement is carried out according to DIN 25043, or based on the manufacturer’s data, the ride quality, functional safety, derailment safety, or compliance with the vehicle gauge can be proven based on the measurement data.…
    Save
  • A.S.T. Power Management Systems for Parked Rail Coaches and Railcar Trainsets

    • InnoTrans 2018
    • Hall 20 217
    #  Energie und Umwelttechnik der A.S.T.- GmbH, in 85283 Wolnzach A.S.T. - Power management systems assures the optimum the power supply for preheating, air conditioning and cold weather standby parking of rail coaches and railcar trainsets. The systems have been developed in cooperation with the former BZA Munich, today´s DB Energie and other European Railroads. They can save up to 40% of energy compared with manual operated preheating or air conditioning systems. Our systems are serving Rail-…
    Save
  • A.S.T. Self-Powered Idle-Stop Technology for Diesel Locomotives

    • InnoTrans 2018
    • Hall 20 217
    #  Energie und Umwelttechnik der A.S.T.- GmbH, in 85283 Wolnzach The ASTop-Idle, is a diesel fuel operated heating system, which operates and protects the locomotives automatically by heating the engine coolant, as well as the engine oil, air compressor and other auxiliary components. The ASTop-Idle reduces low and high idling when parked, maintaining the ideal operating engine temperature, while protecting against water dumping and frost damage. The ASTop-Idle system is listed as an EPA Smart…
    Save
  • A3G 300 - EC axial fan (110 VDC)

    • InnoTrans 2018
    • Hall 3.1 230
    Powerful axial fan with high moisture protection classification IP 6k9k
    Save
  • Aarsleff Rail Group projects in Scandinavia

    Product of Aarsleff Rail A/S
    New
    • InnoTrans 2018
    • Hall 6.1 217
    To strengthen cooperation and business development the Aarsleff Rail Group was created in 2017 joining the forces of Aarsleff Rail in Denmark, Anker AB in Sweden and Banedrift AS in Norway. The group unites three Scandinavian railway contracting companies and their competences, experiences and customer focus. By sharing knowhow and resources, focusing on cooperation, our common goal is to offer good quality, efficient project management and business development to mutual benefit on the Scandinav…
    Save
  • ABB Ability™ Ellipse®

    Product of ABB
    New
    • InnoTrans 2018
    • Hall 9 304
    ABB Ability Ellipse connected asset lifecycle management unifies world-class functionality for enterprise asset management (EAM), workforce management (WFM) and asset performance management (APM). Ellipse facilitates the orchestration of priority, process and people across an organization, enabling the management of physical assets across the entire asset lifecycle. From strategy through execution, Ellipse is a robust and comprehensive business and technology solution focusing efficiencies and d…
    Save
  • Abgaskompensator

    Product of Flexomat GmbH
    • InnoTrans 2018
    • Hall 20 103
    Save
  • Above Floor Wheel Lathes TUU1250

    Product of Koltech Sp z o.o.
    • InnoTrans 2018
    • Hall 22 708
    The above floor wheel lathe type TUU1250 with a friction drive is designed for turning of wheel profiles of rail vehicle wheelsets both the new and the used one. The loading and unloading of wheelsets from the machine can be carried out from the floor level. The wheelset is rolled in and rolled off at the front of the machine.
    Save
  • ABOX-5000G1

    • InnoTrans 2018
    • Hall 4.1 505
    Intel 6th/7th-Gen Quad Core Xeon/i7/i5/i3 CPU with 6 GbE/ 4 COM/ 7 HDMI/ 4 USB 3.0/ NVIDIA® GeForce GTX 1050 GPU/ 9-48V/ In-Vehicle Fanless Computer Intel 6th/7th-Gen Quad Core Xeon/i7 CPU NVIDIA® GeForce GTX 1050 GPU Support 768 CUDA Cores 8 x GPI, 4 x GPO and 4 x RS-232/422/485 Dual Hot Swappable SATA Storage, RAID 0, 1, 5 9-48VDC Input and Operating Temp.: -40 ~ 70°C 6 x GbE LAN (Optional for 4 x PoE)
    Save
  • Abrasion Protection

    Product of Panduit GmbH
    • InnoTrans 2018
    • Hall 11.1 216
    A broad range of abrasion protection products meet your unique application requirements and today’s most demanding fire safety standards. Halogen-free spiral wrap and braided expandable sleeving protect your cables, wires, and tubing from abrasion Heat shrink tubing insulates and protects larger cables
    Save
  • ABRASTOP

    • InnoTrans 2018
    • Hall 5.1 215
    ABRASTOP is a highly durable floor covering that is particularly suited to mass transit overhauls. Main characteristics: Highly wear-resistant Wet and dry non-slip surface Easy to clean Good noise attenuation Customized colours available Integrated logos, HPPL, or tactile strips
    Save
  • ABRASTOP Foam Heating Floor

    • InnoTrans 2018
    • Hall 5.1 215
    ABRASTOP Foam Heating Floor is a complete unitized system that combines Baultar’s highly wear-resistant floor covering, a lightweight structural subfloor, and a heating element in an all-in-one solution.  
    Save
  • ABRASTOP Foam Lite

    • InnoTrans 2018
    • Hall 5.1 215
    ABRASTOP Foam Lite is a structural flooring system that includes a floor covering, an integrated lightweight thermoset foam subfloor, and reinforcing fibres that combine the best features of each of these elements. This is a flooring system that is durable, lightweight, and specially designed for the mass transit market. This integrated floor is bonded directly onto the vehicle’s floor structure with a flexible high-performance adhesive. Main characteristics: Highly wear-resistant …
    Save
  • Absorption circuit choke choke

    Product of REO AG
    • InnoTrans 2018
    • Hall 17 205
    REO offers various chokes for the railway sector, including DC-filter chokes or absorption circuit chokes. The absorption circuit choke is particularly suitable for multi-system vehicles ( 25 kV, 50 Hz AC power, 5 kV, 16.7 Hz AC, 3 kV DC network, 1.5 kV DC power) . The choke is used in combination with a capacitor in the cooling system of the inverter-container and generates a resonant circuit for a specific resonance frequency. The robust construction is designed for a secure mounting, with spe…
    Save
  • Abtus Max Cyclic Top Trolley

    Product of Abtus Ltd
    • InnoTrans 2018
    • Hall 22 102
    The Abtus Max enables Track Engineers to quickly identify, measure and repair Cyclic Top faults and trigger points; ensuring line speed is quickly re-established without the need for a measurement train recording. Track recordings can be viewed on site, the repair tool offers live maintenance guidance in the form of lift recommendations and high/low point identification. The user interface allows pre/post maintenance comparison allowing Track Engineers to clearly see the effectiveness of maint…
    Save
  • AC high-voltage contactors CA Series

    Product of Schaltbau GmbH
    New
    • InnoTrans 2018
    • Hall 2.2 102
    With the CA contactor series Schaltbau is introducing an innovative contactor concept to the market. It ensures the reliable disconnection of all kinds of converters. No matter if it is the inverter for the traction motors of an EMU or the central inverter of a photovoltaic installation, due to its high short-circuit breaking capacity a CA Series contactor is always a reliable cut out switch. In the case of permanent magnet traction motors it thus prevents the drive from being blocked in the eve…
    Save