191 results

Filter search

Apply filters

Halls

Country/Region

191 results

  • 1-AYKY-OT

    New
    • InnoTrans 2018
    • Hall 22 214
    The solution consists basically in the use of a polymer tube as a structural element enabling the user to blow in and install or blow out a fibre optic cable. The tube forms integral part of the metallic hybrid cable. The metallic power cable for the transmission of electric power, designed for a rated voltage up to 0.6/1 kV, or the communication cable carrying an electric signal and the polymer tube are installed under a common outer sheath of the hybrid cable. The polymer tube that is used for…
    Save
  • 115RE, 136RE rail joint bar to AREMA 2012 For North America

    • InnoTrans 2018
    • Hall 22 506
    AREMA Standard Fishplate Standard: AREMA 2012 Material: Chinese steel grade 55# Size: 115RE, 119RE, 132RE, 136RE, 141RE, 100RE, 100RB Chemical Composition C Mn S P 0.35-0.60 ≤1.2 ≤0.040 ≤0.050 Mechanical Property Tensile strength Rm: ≥690 Mpa Yield strength Rel / Rr0.2: ≥480 Mpa Elongation A : ≥12% Reduction of Area Z: ≥25%
    Save
  • 6.7.1

    • InnoTrans 2018
    • Hall 22 204
    Save
  • µSTICK® and µSTICK® TFM

    Product of Dipostel sarl
    New
    • InnoTrans 2018
    • Hall 22 607
    The solid stick, a solid lubricant embedded in a polymer matrix, is applied in small quantities directly to the wheel. μSTICK® ensures lowest coefficient of friction between the flange of the wheel and the gauge face and reduces wear dramatically. μSTICK® TFM ensures a traction coefficient, which increases with increasing wheel slip (“positive friction”) between the tread of the wheel and top of rail. This guarantees optimal traction without noise and corrugation wear.
    Save
  • Above Floor Wheel Lathes TUU1250

    Product of Koltech Sp z o.o.
    • InnoTrans 2018
    • Hall 22 708
    The above floor wheel lathe type TUU1250 with a friction drive is designed for turning of wheel profiles of rail vehicle wheelsets both the new and the used one. The loading and unloading of wheelsets from the machine can be carried out from the floor level. The wheelset is rolled in and rolled off at the front of the machine.
    Save
  • Abtus Max Cyclic Top Trolley

    Product of Abtus Ltd
    • InnoTrans 2018
    • Hall 22 102
    The Abtus Max enables Track Engineers to quickly identify, measure and repair Cyclic Top faults and trigger points; ensuring line speed is quickly re-established without the need for a measurement train recording. Track recordings can be viewed on site, the repair tool offers live maintenance guidance in the form of lift recommendations and high/low point identification. The user interface allows pre/post maintenance comparison allowing Track Engineers to clearly see the effectiveness of maint…
    Save
  • After-market spare railway vehicles parts

    • InnoTrans 2018
    • Hall 22 805
    The sales of the company covers a wide range of spare parts in the fields of rail vehicles and railway and industrial engineering. Below is an extract from our range of spare parts:   Brake Systems Door Systems Wiper systems Control components Battery brackets. Brake cylinder. Bumper for locomotives
    Save
  • AGUTERM PLUS

    • InnoTrans 2018
    • Hall 22 706
    ENERGY SAVING SWITCH HEATING SYSTEM The Aguterm Plus switch heating system designed,manufactured and installed by Revenga makes use of electrical resistors as an energy supply system to prevent the formation of ice and snow on track switches, thus ensuring that switching occurs correctly. Unlike the conventional Aguterm system, which uses a fixed value associated with the ambient temperature as a reference value, the Aguterm Plus uses the track temperature to determine when to turn the heating r…
    Save
  • AJ–2Y(L)2Y2YDB2Y - Signalling cable, screened, with inductive protection

    • InnoTrans 2018
    • Hall 22 214
    Siganlling cable according DB AG 416.0118 for special use in safety devices and for simultaneous LF transmission up to 40 kHz and electricity transmission.
    Save
  • All Types Of Elastic Clip

    Save
  • ALPSD-1000 PLATFORM SCREEN DOORS

    New
    • InnoTrans 2018
    • Hall 22 501
    As ALBAYRAK Makina Company, we have been focused on Platform Screen Doors since 2006, under the brand name of ALDOOR. We started to design and manufacture half height Platform Screen Doors first for Eskisehir tram system. And our 580 half height doors are currently working on Eskisehir Tram System. After half height experience we started to design more complicated full height systems. And for full height applications we designed and manufactured ALPSD-1000. ALPSD-1000 works integrated with sign…
    Save
  • Aluminium Modular Cantilever, Current Carrying Droppers, OHE Fittings,

    Product of PPS International
    • InnoTrans 2018
    • Hall 11.1 116
    • Hall 22 409
    Save