115 results

Filter search

Apply filters

Halls

115 results

  • 19

    Product of Intermas-Elcom GmbH
    • InnoTrans 2018
    • Hall 15.1 204
    For cooling of modules in cabinets or housings. Technical data Materials front panel: 3 mm aluminum, anodized housing, grill: 1 mm steel, al-zinc Ambient temperature max. 70 °C Max. static pressure 73 - 88 Pa Noise level per fan 56,5 - 60,2 dB (A) Power consumption 45 / 42 W
    Save
  • 214RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 3 X 130 KVA Auxiliary Converter

    • InnoTrans 2018
    • Hall 15.1 216
    The product is developed for feeding auxiliary power to WAP7/ WAG9, WAG9H three phase locomotives for Indian Railways. It is in accordance with IEC 61287-1, IEC 60571, IEC 60310 and IEC 61373. Salient Features: A modular concept, in which, each module serves a specific power and control function. Designed to give 3x130 kVA with VVVF control. Designed to sustain wide input voltage and frequency variations. Interface with Key multiplier set. Digital Signal Processor (DSP) ba…
    Save
  • 3324RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 3370RR

    Product of START PAC
    New
    • InnoTrans 2018
    • Hall 15.1 102
    Save
  • 500 KVA HOG Converter

    • InnoTrans 2018
    • Hall 15.1 216
    The product is designed to meet requirement of IEC 60571 (Edition 2.1), IEC 61287-1 (Edition 2.0), IEC 60310 (Edition 3.0). IEC 61373 (Edition 2.0) and other relevant IEC and Indian (BIS) standards. Salient Features: State of the art DSP based system System. Stabilised and balanced output at 750 V and 50 Hz with minimum distortion. Balanced output eliminates the need of special auxiliary motors thereby reducing the cost of auxiliary motors. Near unity power factor achieved us…
    Save
  • 6DMH160 with automatic water filling system

    • InnoTrans 2018
    • Hall 15.1 305
    Nickel cadmium battery model for High speed train
    Save
  • AC switchgear air-insulated indoor installation 1S-2x25 series and 1S-27.5 series

    Product of NIIEFA-ENERGO LLC
    • InnoTrans 2018
    • Hall 15.1 208
    The AC switchgears, air-insulated, indoor installation 1S-2x25 series (SWG-2x25 kV)  and 1S-27.5 series (SWG-27.5 kV) are designed to distribute of the electric energy alternating current 2х25 kV  and  27.5 kV at AC railway traction substations. AC switchgear panel types 1S-27.5-2-WW-UHL4 two-pole circuit-breaker incoming panel 1S-27.5-1-FKS-UHL4 single-pole feeder circuit-breaker panel 1S-27.5-1-ZW-UHL4 single-pole bypass circuit-breaker panel 1S-27.5-2-DPR-UHL4 two-pole circuit-breaker “two …
    Save
  • ADMF-M (Fire protection closure)

    Product of FLEXA GMBH & CO. KG
    New
    • InnoTrans 2018
    • Hall 15.1 218
    In the field of the railway industry fire protection has become more and more important for manufacturers and operators. The new E30-fire blocking element (ADMF-M) ensures, that two areas remain seperated from each other for at least 30 minutes (E30) in accordance with EN 45545-3. The adapter with same metric inner and outer thread size according EN 60423 is available in sizes M 16 up to M 50.
    Save
  • Amantys Gate Drives

    • InnoTrans 2018
    • Hall 15.1 213
    Amantys Gate Drives control the switching of IGBT Modules from all major manufacturers at operating voltages of 1200V, 1700V, 3300V 4500V and 6500V, and each includes Amantys Power Insight for remote configuration and condition monitoring. These IGBT Drivers use the Insight protocol over the fibre optic cable to detect and communicate radio signal receive strength, moderate transmit power to optimum level, thus enhancing the lifetime of the fibre optic in traction inverter systems. In addition…
    Save
  • ANACONDA MULTIFLEX

    Product of ANAMET EUROPE B.V.
    • InnoTrans 2018
    • Hall 15.1 203
    U.I.: mechanically strong & corrosion resistant The U.I. conduit is fully inter-locked and therefore extremely compression and impact resistant. Type U.I is very much suited for applications where next to flexibility also mechanical protection and excellent heat and corrosion resistance is required. This explains why U.I. is being used so much in the steel and aluminium foundry industry, machine and apparatus building, offshore, security, and metal industry. Construction : stainle…
    Save
  • ANACONDA SEALTITE , HFX-V0

    Product of ANAMET EUROPE B.V.
    • InnoTrans 2018
    • Hall 15.1 203
    Type HFX-V0 is designed especially for meeting the new regulations for rolling stock in the train industry. It is designed for installations, which are subject to frequent movements as HFX-V0 keeps its excellent flexibility even at low temperatures. HFX-V0 is specifically meant for the train- and metro-building industry. Material & Construction: Construction: Galvanised steel core, square-locked with cord packing, thick smooth thermoplastic cover (V0-rated Polyurethane). From 1 1/2” a f…
    Save