30 results

  • Cable ties 22

    • InnoTrans 2018
    • Hall 14.1 305
    Complete product family for all kind of applications  Wide range of sizes to cover a diameter scope from 1,6mm to 362mm. Insulating material: maximum electrical safety Own design and manufacture. Main mounting features: Hand thread, quick and effortless manual assembly: easier mounting at site. Finger-friendly rounded ends. Insulating locking mechanism: Highly resistant, assures easy fixing and tightening of the cable tie. Inside flush teeth…
    Save
  • Carpathia 1300 DH-M

    • InnoTrans 2018
    • Hall 14.1 205
    The Carpathia 1300 DH-M locomotive Proven and very robust railway design solutions like the turbo-transmission and running gear have been complemented with the latest equipment. The modernization comprises of a new engine, a screw-type air compressor, Behr cooling system, the complete replacement of the hoods, cab and electrical system. The new cab creates conditions for simplified operation and puts the 1300 DH-M in a class of it's own, the perfect platform for all-round day-to-day freight…
    Save
  • Carphatia DE-M 2300

    • InnoTrans 2018
    • Hall 14.1 205
    The Carpathia 2300 DE-M locomotive brings the latest railway technology into a proven design, that of the LDE 2100 Locomotives.
    Save
  • Converter ENI-PL3000/130/S2

    Product of Enika Sp. z o.o.
    • InnoTrans 2018
    • Hall 14.1 303
    The ENI-PL3000/130/S2 is a locomotive auxiliary converter intended to output 3 x 400 V, 50 Hz sine AC voltage and 24 VDC voltage for electrical lines aboard retrofitted EP-07 rail locomotives. This is a UIC-600 compliant HV powered device. When the vehicle is stationary, the converter can recharge the battery bank via 230 V, 50 Hz power supply connector. Main technical paramateres: supply voltage: 3000 VDC nominal power: 130 kW nominal power of output AC1 and AC2: 20 kW, cos φ ≥ 0,8 nominal …
    Save
  • Converter ENI-PT600/24/AC/EL

    Product of Enika Sp. z o.o.
    • InnoTrans 2018
    • Hall 14.1 303
    The ENI-PT600/24/AC/EL static converter is intended as a 3 x 400 VAC and 24 VDC power supply for auxiliary systems in low-floor trams. Main technical parameters: Rated input voltage: 600 VDC Supply voltage variation: 400 to 900 VDC Rated voltage: 27,9 VDC ± 0,1 V Rated output current: 350 A (400 A current source mode for 30 s) Battery charging current limit: 25 A ± 2 A Rated power AC output: 17 kVA Design: The converter is installed in a sealed and robust aluminium sheet enclosure which ho…
    Save
  • Door closing force measurement device DC360N for railway, tram and bus doors

    • InnoTrans 2018
    • Hall 14.1 101
    The door closing force measuring device type DC360N is an outstanding instrument for the measurement and evaluation of the closing force of railway-, tram- and bus doors. The measuring device was constructed according to DIN EN 14752:2005 / BS EN 14752:2005 and VDV 111.Measuring range: 30N - 360N (optional 500N) Robust hand-held computer Psion Workabout Pro with colour display, protection class IP 65 - can withstand 26 falls onto smooth concrete surfaces from 1,5 meters Allows input of tester na…
    Save
  • Door closing force measurement device DC700N according to EN 14752:2015 for railway, tram and bus doors

    • InnoTrans 2018
    • Hall 14.1 101
    The door closing force measuring device type DC700N is an outstanding instrument for the measurement and evaluation of the closing force of railway-, tram- and bus doors. The measuring device was constructed according to DIN EN 14752:2015 / BS EN 14752:2015.Meets all requirements of the standard EN 14752:2015 Measuring range: 50 N to 700 N, Compact force sensor with only 1.9 kg weight Spacer for different doorways with quick-release mechanism for quick adaption (opening width: 50, 100, 200, 300,…
    Save
  • Electrical switch point heating - FLEXELEC

    Product of Flexelec SAS
    • InnoTrans 2018
    • Hall 14.1 103
    High power constant power cables. FTS3/IS cables are designed for protecting railway lines, points and power rails from freezing or for keeping them clear of snow. To ensure that these heating elements enjoy a long service life, we recommend using a control device. TECHNICAL CHARACTERISTICS : • Welded contact points. • Can be cut to length on site. • Extremely simple termination. • Cold tail incorporated: no extra connection necessary. • Available as 100 W/m. • Power supply…
    Save
  • EMD Cables for Diesel Locos

    • InnoTrans 2018
    • Hall 14.1 302
    Save
  • Heating mats FLEXMAT

    Product of Flexelec SAS
    • InnoTrans 2018
    • Hall 14.1 103
    Silicon elastomer insulated mat. Also exists with adhesive back for permanent fitting or can be vulcanised on metal backing.
    Save
  • Insulating cable tray 66

    • InnoTrans 2018
    • Hall 14.1 305
    An insulating alternative for cable management in indoor and outdoor rail infrastructure Safety: Electrical: Dielectric strength assuring protection against the risk of electrocution through indirect contact. In front of fire: Reduces the risk of electrical arcs and fire sources. Reliability of the signal transmitted: Avoids eddy currents and facilitates the control of the grounding system. Cost reduction: Earthing not required: No need for copper conductors. …
    Save
  • Inverter ENI-FT600/200RT6N1

    Product of Enika Sp. z o.o.
    • InnoTrans 2018
    • Hall 14.1 303
    The ENI-FT600/600/200/RT6N1 inverter box supplies regulated frequency AC power for asynchronous traction motors. A single box features a gang of two inverters for controlling two asynchronous motors. Each inverter features a dedicated microprocessor controller supervised by the tramway onboard drive controller, and both communicate with each other via CAN and I/O contact. Main technical parameters: nominal supply voltage: 600 VDC range of supply voltage: 420 ÷ 900 VDC nominal output voltage: …
    Save