109 results

  • 'Series EMA' Battery powered torque wrench

    Product of ws-tools OHG
    • InnoTrans 2018
    • Hall 8.1 107
    slim design low weight for fatique reduced operation 4 gears for fasten tightening and maximum torques up to 60 torque steps selectable ratchet adjustment of gears, easily adjustable in 24 steps of 15 degrees: secure fastening of screw connections even in confined spaces brushless (FINE) PowerDrive motor with high degree of efficiency and wear-free characteristics Dust-proof thanks to encapsulation battery with charge level display lithium-ion battery with charge level indicator available from 7…
    Save
  • 3D Metrology

    • InnoTrans 2018
    • Hall 8.1 217
    GMA Werkstoffprüfung GmbH uses state-of-the-art laser tracker systems for a wide range of demanding geometric measurements in industry. These are systems from Leica and API (Leica AT960-XR with T-Probe and T-Scan 5, API OmniTrac 2 with vProbe). These systems combine highest measurement accuracy with ultra-mobility. Measurement volumes of up to 100 m diameter can be measured from a single point of view with accuracies in the 0.1 mm range. In addition, the systems are equipped with optional probes…
    Save
  • Adjustable male adaptor fitting WEE

    Product of EXMAR GmbH
    • InnoTrans 2018
    • Hall 8.1 213
    The adjustable male adaptor elbow fitting WEE allows easy installation in any direction. It is more compact than the other known adjustable fittings such as the EWV or EWKO where the directional adjusting is made with a stud standpipe adaptor. The adjustable male adaptor elbow fitting WEE with counter nut and bonded O-ring offers the following advantages less space needed due to its compact shape compensates for small differences in height reduces potential leakage points directionally adju…
    Save
  • AIR DUCT

    • InnoTrans 2018
    • Hall 8.1 112
    PART OF THE TURBO CHARGE OF THE DIESEL LOCOMOTIVE.
    Save
  • Air-duct

    • InnoTrans 2018
    • Hall 8.1 110
    Save
  • Aluminium Castings

    • InnoTrans 2018
    • Hall 8.1 209
    THONI-ALUTEC offers 2 casting methods. The sand casting process offers highest flexibility and low tooling cost. We use this process to produce casting weighing up to 10 tonnes and covering a length of over 30 feet. The gravity die casting process is used to produce high quantities and gives also higher strenght. Nevertheless this method has its limits and we currently produce maximum casting wheights of 90 kg. Heavier parts can be produced but this is very much depending on their shape. …
    Save
  • Aluminium compression ferrule fittings

    Product of SERTO AG
    • InnoTrans 2018
    • Hall 8.1 213
    SERTO now supplies a new, aluminium version of its tried-and-tested compression ferrule fittings for radial installation. The radial system and the compact design makes these fittings especially suitable for use in the confined spaces in switching cabinets. The aluminium SERTO compression ferrule fitting is as lightweight as plastic (only a third of the weight of stainless steel) and is very robust. It is resistant to thermofluids, mineral oils, various gases, etc. and is ideally suited for use…
    Save
  • Aluminium solutions

    • InnoTrans 2018
    • Hall 8.1 216
    We supply customized aluminium solutions to the rail industry like light weight panels based on extruded aluminium profiles and joined by Friction Stir Welding.
    Save
  • Assembly jig of locomotive chassis part

    Product of IBSDesign S.C.
    New
    • InnoTrans 2018
    • Hall 8.1 308
    Executed works: Conception Calculations 2D- and 3D- Models Project Management Project implementation Budget: 550 hrs
    Save
  • Baseplate

    • InnoTrans 2018
    • Hall 8.1 302
    Material: GGG
    Save
  • Bending

    Product of HBB Biegetechnik AG
    • InnoTrans 2018
    • Hall 8.1 235
    Using the latest CNC / NC MACHINES we turn metals such as steel, chrome steel, aluminum, brass, etc. up to ø 120mm. Our experience in this area is very large, because we approach every job individually and have collected over the years, experiences that have led to the perfection of the bending technique. We are developing continuously. For special tasks such as bending profile design and build their own tools.
    Save
  • BIO-CIRCLE GT Maxi und Compact

    • InnoTrans 2018
    • Hall 8.1 324
    The BIO-CIRCLE GT Maxi and Compact captivate with their compact design and flexibility. The BIO-CIRCLE GT's facilitates easy and safe parts cleaning. The water-based cleaning process makes use of natural microorganisms and work without any solvents or cold cleaner, thus protecting the operator and the environment from highly volatile vapours. Biological oil degradation guarantees a long service life. No hazardous substance, no hazardous good, no fire hazard. BIO-CIRCLE – a long-t…
    Save