133 results

  • 3-axle Bogie

    Product of Greenbrier Europe
    • InnoTrans 2018
    • Hall 3.2 304
    • Outdoor Display 2/117
    • Outdoor Display 2/118
    • Outdoor Display 4/405
    • Outdoor Display 4/406
    The 3-axle bogie type 3ALs1o-K(V) is designed to equip heavy freight wagons with a maximum weight of 25t/axle. The bogie is constructed in accordance with UIC and EN requirements. The bogie weight is ~7.6 tons and consists of 3 wheelsets with a diameter of 920 mm, a welded bogie frame, suspension with progresive leaf springs, fixed side bearings and a clasp brake using composite blocks 2xBg. If required the bogie can be equipped with a weighing valve. Advantages: - Reduced weight - Radial stee…
    Save
  • 6-axle 80-foot articulated wagon for the transport of containers

    • InnoTrans 2018
    • Hall 3.2 208
    • Outdoor Display 2/115
    The intermodal wagon was designed and produced by United Wagon Company according to European standards specifically for operation on 1,435 mm track gauge in Europe. Thanks to its articulated structure, the 80-foot wagon has a payload capacity of up to 107.5 tons, which allows it to safely transport various ISO container sizes, tank-containers and swap bodies with a total weight of up to 36 tons. The wagon is equipped with hinged container pins in compliance with European standards for the accomm…
    Save
  • 8-axle low-floor carriages

    • InnoTrans 2018
    • Hall 3.2 203a
    Save
  • A rapid dismounting solution for a UIC semi-permanent drawbar

    New
    • InnoTrans 2018
    • Hall 3.2 301
    With the aim of always looking for any enhancement, following a request from one of our customers to assist them with a solution for mounting and dismounting a UIC semi-permanent drawbar which could be carried out by a single person on track, LAF designed a solution with a secure collar in accordance with the customer technical specification. This solution enables the operator to improve both productivity and efficiency.
    Save
  • Ammonia pressurized gas railway tank car V=108 cubic metres

    Product of CHEMET S.A.
    • InnoTrans 2018
    • Hall 3.2 210
    • Outdoor Display 7/407
    • Outdoor Display 7/408
    The railway tank car with a nominal volume of 108m3 can be used for transport of ammonia, liquified propan-butan gases as well as other gas mixtures. The car construction has been tested in the Polish Rail Institute and the Swiss Federal Office of Transport has confimed the compliance with the TSI, UIC as well as RID regulations. Therefore the car is allowed an unrestricted operational ability on international railroad network. Optional car equipment: overbuffering protection according to TE25 …
    Save
  • Asset Managment and Maintenance

    Product of Vibratec
    • InnoTrans 2018
    • Hall 3.2 301
    VibraTec launches its maintenance assistance offer for the Track and Rolling Stock. Services developed by VibraTec can detect defects on running surfaces and predict the wear of rails, this minimizes the Life Cycle Cost (LCC). Vibratec is also specialized in the analysis of residual life duration of rolling stock to optimize operating periods and asset management.
    Save
  • ASTRA Bogies

    • InnoTrans 2018
    • Hall 3.2 204
    Subsystems bogies Bogies UIC for 160km/h and 200km/h speed Speed, comfort, safety and reliability are the product characteristics required by all railways operators. These are also the main characteristics of the Y32 bogie family manufactured by ASTRA VAGOANE CALATORI SA. The Y32R bogie run with 200 km/h speed, and equip the passenger coaches for international traffic Z1 UIC. The bogies Y32RI equip the 160km/h Z2 UIC passenger coaches, and the bogies Y32 RS replace the old bogies of 140km/h o…
    Save
  • ASTRA Rolling stock

    • InnoTrans 2018
    • Hall 3.2 204
    Passenger coaches, special coaches, metro cars, tramways, EMU's, DMU's, vans The new millennium brought the explosion of the communications. The different curtains folded up. The people are moving more, to new destinations. More speed, more comfort, cleaner, ecological, vehicles more viable, available to PRM, reliable, maintainable, safe, these are the requirements of modern transport. Long distance transport, on main lines, is made now with high speed, in comfort and comp…
    Save
  • ASTRA Services & Solutions

    • InnoTrans 2018
    • Hall 3.2 204
    Maintenance The transport operators wish to have rolling stock with great availability. Short overhaul delays, maintaining the performances, maximizing of the operation time these are the requirements of a high maintenance quality. ASTRA Vagoane Cãlãtori is performing the service of complete maintenance for all of its products: Technical intermediate overhaul RTI, Technical general overhaul RTG, Periodical overhaul RP, General overhaul RG for AVA200 passenger coaches, modernized c…
    Save
  • AUXIM AUXILLIARY PNEUMATIC PANEL

    Product of Ades Technologies
    • InnoTrans 2018
    • Hall 3.2 301
    Ades technologies is able to provide upon demand complete systems of pneumatic panels or subassemblies for auxillaries systems like: doors, pantograph, toilets, horns, first class seats,.. 
    Save
  • AUXIM VALVES

    Product of Ades Technologies
    • InnoTrans 2018
    • Hall 3.2 301
    AUXIM Division for the following markets: railway technology, army, manufacturing industry, with products as: - AUXIM cylindrical plug valve low and medium pressure. - RAFLEX fittings with O-rings and tapered rings for low and medium pressure. - Safety systems for tank wagons with pneumatic and hydraulic operators Auxiliary control panels with pneumatic tubing (Systémier®). Our components equipped different projects since 1948 such as : TGV, Metro Caracas, Metro Shangaï, European freight....…
    Save
  • Bellows and Gangways

    • InnoTrans 2018
    • Hall 3.2 301
    Colmant Coated Fabrics has a long and successful experience in the design and manufacturing of rubber sheets and technical coated fabrics used in the Transport Industry. The high quality of our formulations and the demanding specifications for our technical textiles made us become one of the major suppliers of the French high speed train (TGV – SNCF) bellows as an OEM. Bellyn represents our segment of polymers designed for our customers who manufacture bellows & gangways for trains or …
    Save